Ineffective autolevel results
I have a delta printer running repetier .91 with a capacitive Z-probe.The problem I am having is that after running autolevel with G32, small prints in the center of my bed stick well but larger prints...
View ArticleErrors
I will start out by saying I am pretty new to all of this. I am an Arduino user (Intermediate) and I have never used a 3D printer. I am currently building a Delta style printer and the mechanics of it...
View ArticleX Y Problem an Sparkcube
Hallo zusammen,nach dem ich die Endschlater so weit konfuguieren konnte ist jetzt ein weiteres Problem aufgetaucht....Wenn man eine X Bewegung fahren möchte bewegt sich nur der linke Antriebandersrum...
View ArticleAfter lightning storm and power fluctuations: "A is hitting bed error" - But...
Hello,So, I got my printer more or less working - Turns out the fine tuning of the various lengths are very important...It is a delta printer, much like the mini kossel one (K800 mine is called). It is...
View ArticleClik here to view.
v0.92 | issue with EEPROM & SDSUPPORT
Hello everyone,before I start, I will give a short into about me! I am Chriss from Germany and use Repetier for nearly one year on a self construct Delta Printer with PiBot Electronic! Now, I want to...
View ArticleUploaden Gcode to SD card on Melzi 2.0 is not working anymore
I have updated my firmware with Marlin_1 and the U8glib for the LCD graphics display (128x64) . All things working fine , except my mini SD card on the Melzi 2.0 board , this is not working anymore. I...
View ArticleAxis compensation
Any takers on how to get the Axis Compensation to work for a Cartesian? My XY is off to about 3 degrees. So I put .052 into the firmware on XY Compensation. I haven't noticed a change. I've tried...
View ArticleError Compilling
Hi in desperate need of help. I am building my own cnc router/ printer. I have hit a stop can't manage to get repetier firmware to compile. I am using an arduino mega 2560 and ramps 1.4. so far I have...
View ArticleAuto bed leveling does not update z-height
Hello,I have tried to make the auto bed leveling feature work.At first it worked fine with a manually installed z-probe.I have now put the probe on a servo controlled arm.When i now use the auto level...
View Articleui.cpp errors when verifying code in Arduino Ide
I am getting the following compile errors when I verify the code in Arduino IDE. Using firmware configuration tool 0.92.2. ui.cpp: In member function ‘bool UIDisplay::nextPreviousAction(int16_t,...
View ArticleRepetier Firmware + Melzi + Panelolu2??
Hi allMy first 3d printer is a Prusa i3 kit that came with a melzi board with Sprinter firmware.I successfully built this and I'm using it every day.I bought a Panelolu2 for the Melzi which I later...
View ArticleAuto level is not level
HiCould do with some help. Im needin to use auto level on my mini kossel as printer is moved around a fair bit on the desk so gets uncalibrated if i run without etc.Wanting to run repetier firmware...
View ArticleZ Probe not working with G30
Hi, Sorry for starting a new discussion, but I have not seen a solution to my issue. I have been struggling with this for over a week and would really appreciate some help.I have a home built CNC...
View Article0922 Temp Sensor Defect error
I installed 0922,with same settings at my 092. Now I get temp sensor defect error at 130C. If I load 092 back, everything is fine.Anyone have this problem?
View ArticleFirmware settings for SD card
We are running a large reprap directly from Repetier on a Mac laptop through the control box they supplied. We have never used the SD card input, control box does not recognize cards.Company that made...
View ArticleMachine freezes after autolevel in 0.92.2
Hello Repetier,I installed 0.92.2 on my CNC router recently, and after G30/G32 it takes the probe(s), returns to the initial position and stops recieving any commands. Only Emergency stop resets the...
View ArticleMax PWM in vers 0.92
I a trying to configure the firmware settings for my pibot vers1.4 board with vers 0.92 and noticed that the max PWM setting for the extruder under the temperature menu is no longer there. For the...
View ArticleZ-Speed too slow
Hello,I have an Mendel Max printer with dual extruderI uploaded the current repetier firmware, everything works but the z-speed. its extemely slow, and the step are wrong i think. (insetead of 10mm,...
View ArticleRamp 1.4
I have tested all the motors and the heater with this code and it's working: http://reprap.org/wiki/RAMPS_1.4#RAMPS_1.4_test_codeWith Repetier software evrything works exept the extruder motor.Did I...
View Articlev0.92 too big for Gen6 (ATmega644p)
When compiling v0.92 for my gen6 board I get a too big error (about 68KB).Am I doing something wrong or does v0.92 not support 644p based boards?Thanks
View Article
